The Torque-Block^® driven positioning table enables precision movement in one axis.
The adjusting range is 500 µm. An inductive position measuring system is integrated in the table.
Electrical control is provided by the Torque-Block^® unit ase/pcs/twa/a.
A linear, feedback controlled and hysteresis-free movement of 400 µm is thus ensured.

Displacement	400 µm feedback controlled, (500 µm controlled)
Direction of movement	voltage pin 9 0 V, -x
	voltage pin 9 400 V, +x
Positioning time at full stroke	10 ms with feedback control
Non-linearity	±2 %
Resolution	0,2 µm
Resonance frequency of the unloaded system	550 Hz
Stiffness	0,4 N/µm
Maximum permitted load	200 N
Max. load with feedback control dep. on position	20 ... 200 N
Operating voltage	400 V
Connection	10 pole connector with cap nut
	5A/490VDC, manufacturer: HRS
Dimensions (L x B x H)	(107 x 40 x 25,1) mm
Weight	0.6 kg
Attachment of table	fastening screw thread M4 (3x)
	pin drill hole Ø3F8 (2x)
Attachment of object	fastening screw thread M3 (2x)
	pin drill hole Ø2F8 (4x)

The technical data were determined in conjunction with the control electronic unit ase/pcs/twa/a.

Connection Assignment:

Contact	Signal
1	enable input
2	signal ground
3	drive ground
4	position monitor output
5	free
6	operating voltage measuring system
7	enable output
8	protection earth
9	drive voltage
10	operating voltage Torque-Block®

We are happy to develop solution-specific variations for our customers.

Attachment of drive unit

Order Number	Release	Description
asy/tx500/b	1.0	Antriebseinheit
ase/pcs/twa/a	1.0	Torque-Block®-Ansteuerung

Contact

Actuator Standard Products

PDF Version

Deutsche Version

marco Systemanalyse und Entwicklung GmbH Hans-Böckler-Str. 2 . D-85221 Dachau Tel (+49) [0] 8131 5161 0 . Fax (+49) [0] 8131 5161 66

http://www.marco.de/E/D/asy/tx500/b/001.html - Rev. 1.5 (2003-07-28) All Rights Reserved Any questions or comments about this page? webmaster@marco.de